Search results for: 'fob for videx' 065,07248'

3000 Series Audio Handsets

4000 Proximity Reader Modules

Switched mode 1.25A 12Vdc DIN mount power supply.

Used for Videx GSM kits.

Coded access and Vprox proximity modules are available for the 8000 Series range:

8800 – 2 code, 2 relay output coded access module with push to exit inputs.  Both relays are programmable between 1-99 seconds or latching.  Codes can be 4-8 digits long.

8900- 100 code, 2 relay output coded access module with push to exit inputs.  Both relays are programmable between 1-99 seconds or latching.  Codes can be 4-8 digits long.

8849 – Proximity reader module suitable for all Vprox systems. It has a yellow standby led, green “fob/card accepted” led and red “not valid led. This reader must be fitted within 50 metres of controller and requires 5 connections.

8840 – this module can be used for mounting non-Videx equipment in to modular door panels, as a filler for future expansion of the entrance panels features or to complete a panel where the required number of modules is not equal to the housing capacity.

8846 – Backlit with a white LED and is used for displaying information such block name or special instructions. Complete with card insert which can easily be changed from the inside. 

VR4KVPM – Vprox reader module suitable for all Vprox systems. It has a yellow standby led, green “fob/card accepted” led and red “not valid led. This reader must be fitted within 200 metres of controller.

VR4KEX5M – Coded access module including an EX5 reader with 99 codes and 2 relay outputs with push to exit buttons inputs for each.

VR4KPPM – Wiegand proximity reader module for Portal Plus systems. Includes 3 LED’s and sounder for user feedback. Can be used on the Portal Plus access control system or other third party systems which support the Wiegand protocol.

VR4KPROXM – Blank proximity reader module (to fit 40mm x 40mm panel mount reader).

VR4KDM – LCD display and voice annunciation module

VR4KMI – VR4K series MiAccess proximity reader with smart Mifare PC programming and USB port

VRMI – Add a MiAccess proximity reader with smart Mifare PC programming and USB port to a Vandal Resistant series panel

8000 Series speaker modules are available for a range of Videx systems, from standard analogue up to Vx2200 digital systems. The speaker modules themselves are available with either 0, 1 or 2 buttons, and a further 62 buttons may be added using 8842, 8843, 8844 and 8845 button modules.

All modules name windows are illuminated, and contain a replaceable insert for displaying flat numbers or names.

All modules contain a speaker and fly lead with microphone which is easily fitted in to a 8000 Series frame. Modules slide in to the housing frames securing them in place.

Speech levels may be adjusted using separate controls for both the speaker and microphone.