Search results for: 'tg:echokrys0 back goods tradit strategy r front reddit'

13.8Vac (1A max), 12Vdc & 8Vdc (250mA max) power supply unit is  a wall/DIN mount box. 8 Modules A type DIN box (140mmx105mmx65mm)

Rainshields for the 8851, 8852 and 8853 flush boxes.

 13.5Vdc 1A pulse or 800mA continuous PSU in a 9 modules A type DIN box. (157.5mmx105mmx65mm) Also includes a 13.5Vac 1A output and battery changing output.

8000 Series Button Module

Desk mount only for full base 3000 series handsets:

• 3101
• 3102
• 3111
• 3112
• 3113
• 3114
• 3117
• 3121
• 3123
• 3125
• 3126
• 3171
• 3172
• 3176
• 3181
• 3183

Does not fit half base 3000 series handsets:

• 3001
• 3002
• 3011
• 3021

8840 – this module can be used for mounting non-Videx equipment in to modular door panels, as a filler for future expansion of the entrance panels features or to complete a panel where the required number of modules is not equal to the housing capacity.

8846 – Backlit with a white LED and is used for displaying information such block name or special instructions. Complete with card insert which can easily be changed from the inside. 

VR4K Series Button Module

The keypad can be programmed with 3 codes (1 code per relay), with 3 relay outputs which have a switched 0V PTE input for relays 1 and 2 only. The relays are programmable between 1-99 seconds or 00 for latching mode. Low current keypad which requires a 12-24v ac/dc psu and have blue backlit buttons with adjustable brightness control.

VR4K Series Speaker Module

4000 Series Camera/Speaker Module

Vandal resistant 4000 Series accessory modules:

VR4KIFM – Information module for 4000 VR panels. Backlit with blue led’s, it had a card insert which can be used for Company name or operating instructions etc.

VR4K blanking module for 4000 series VR panels. Used to fill in spare space in 4000 series modules to mount third party prox/swipe readers etc.

VR4KIND – Audio induction loop module for the hard of hearing.  The induction loop can connect to various audio amplifiers (136N, 138N, 140, 150 GSM, 437 and Vx2200 digital panels) to enable users with a hearing aid set to the ‘T’ position to hear the conversation from the intercom panel.

VR4KVPM – Vprox reader module suitable for all Vprox systems. It has a yellow standby led, green “fob/card accepted” led and red “not valid led. This reader must be fitted within 200 metres of controller.

VR4KEX5M – Coded access module including an EX5 reader with 99 codes and 2 relay outputs with push to exit buttons inputs for each.

VR4KPPM – Wiegand proximity reader module for Portal Plus systems. Includes 3 LED’s and sounder for user feedback. Can be used on the Portal Plus access control system or other third party systems which support the Wiegand protocol.

VR4KPROXM – Blank proximity reader module (to fit 40mm x 40mm panel mount reader).

VR4KDM – LCD display and voice annunciation module

VR4KMI – VR4K series MiAccess proximity reader with smart Mifare PC programming and USB port

VRMI – Add a MiAccess proximity reader with smart Mifare PC programming and USB port to a Vandal Resistant series panel

1 & 2 button 8000 Series colour camera and speaker unit for the VK8K kits. 

The module has an inbuilt colour CCD camera complete with auto iris lens and infra-red LED’s for illumination, an anti-mist device plus a screw to adjust the visual angle 10 degrees in any direction.  The unit does not require a coxial cable and instead used a balanced video signal requiring a twisted pair.